Recoil Anchor Escapement
Recoil Anchor Escapement
Recoil Anchor Escapement
Recoil Anchor Escapement

Recoil Anchor Escapement

Regular price $7.99
Unit price  per 

This is one the most common escapement mechanisms found due to it's simplicity.  Named the recoil anchor escapement because the escapement wheel recoils on each beat due to the force applied to the wheel by the pendulum via the anchor.

The how to assemble video is available here

The STL File:

Prints on all standard 3d printers without supports, requires the following additional parts to assemble:

- 2 M4x12 Screws (I used some from this set)

- 4 M4 Washers (These are the ones)

- 2 624Z 13mm OD/4mm ID Bearings (These work great)

- 6ft 1mm Nylon String or Fishing Line (I used string from this set)

Recommended print settings:

Layer Height: 0.2mm

Nozzle: 0.4mm

Infill: 15-18% 

Total Print Time: ~19 hours

Total Filament Used: ~145g

**All the files have been pre-oriented to save you some set up time! All you need to do is drop the parts into your slicer and hit print!

The Kit:

Let me do the printing for you! You will receive all the parts required to assemble this kinetic sculpture yourself.